Technocraft Products for Lamborghini Gallardo

Posted on April 3, 2012 by Aaron

Technocraft Lamborghini Gallardo Dry Carbon Fiber Aero Underbody Panels

Description

Tecnocraft Aerodynamic Underbody Panels continue to reinforce aerodynamics beneath the Lamborghini Gallardo. Underbody panels are a highly overlooked component in improving airflow velocity – our pre-preg dry carbon underbody panels also provide an 80% weight reduction to factory injection molded plastic, and incorporate much improved venturi channels toward the rear of the vehicle. Developed in two parts; a front section supporting the Tecnocraft GT Front Splitter, and a mid-section to continue airflow characteristics to the Tecnocraft Rear Diffuser.

Performance inspired Tecnocraft Aerodynamic Underbody Panels not only complement but also complete the entire Tecnocraft exterior package developed specifically for the Lamborghini Gallardo.

Featuring:

- Superior strength and durability when compared to PUR or ABS
- Improved high speed lateral stability
- Available separately (front and middle sections)
- Available in natural dry carbon fiber or carbon kevlar finish
- Installation manuals and additional hardware included. Retains factory Lamborghini Gallardo OEM fitment
- Note: Professional installation highly recommended

Technocraft Lamborghini Gallardo Dry Carbon Fiber Cold Air Intake System

Description

Airflow dynamics and intake efficiency are greatly improved over the factory Lamborghini Gallardo intake airboxes with the installation of our complete dry carbon fiber intake system. Furthermore, we referenced the mantra of ‘form and function’ and incorporated an organic, fluid-composite design that improves the audible characteristics, visual aesthetics and overall horsepower of the Lamborghini Gallardo V10.

Tecnocraft Cold Air Intake Systems for the Lamborghini Gallardo (MY2003+) maintain the natural curvilinear flow of ingested air as much as possible, reducing as many ’90 degree’ junctions to keep airflow naturally moving forward.

Featuring:

- Increased natural airflow toward intake plenum with larger venturi chambers
- Aesthetically pleasing muscular (but functional) appearance to complement a handcrafted Italian V10 engine
- Pre-preg aerospace/race grade dry carbon fiber (Carbon Kevlar is available upon request)
- Installation manuals and additional hardware included. Retains factory Lamborghini Gallardo OEM fitment
- Assembled Weight (as seen): 2.5lbs
- Note: Professional installation highly recommended

Technocraft Lamborghini Gallardo Dry Carbon Fiber E-Gear Plate Accent

Description

Tecnocraft precisely developed our Lamborghini Gallardo E-Gear interior plate in dry carbon fiber to provoke curiosity within the V10 powerplant. This dry carbon accent is reserved for individuals willing to push weight saving performance to extremes, but also remain relatively subtle within the Gallardo cockpit.

Featuring:

-Factory Lamborghini Gallardo E-Gear Plate fitment
-Retains original hardware
-Easy installation
-Available in natural dry carbon fiber or carbon kevlar finish

Technocraft Lamborghini Gallardo Dry Carbon Fiber Engine Compartment Covers

Description

To complete your purchase of additional Tecnocraft Lamborghini Gallardo products, our design team further refines the visual appeal of the engine bay by creating complementary dry carbon OEM replacement engine compartment covers. Made with pre-preg dry carbon fiber, these compartment covers help to maximally decrease engine hatch weight and ensure a theme of dry carbon commonality within the Lamborghini Gallardo V10 powerplant.

Featuring:

- Available in natural dry carbon fiber or carbon kevlar finish
- Complete with four (4) engine compartment covers
- Installation manuals and additional hardware included.
- Retains factory Lamborghini Gallardo OEM fitment

Technocraft Lamborghini Gallardo Dry Carbon Fiber Front Bonnet

Description

Another invaluable and extremely noticeable upgrade to the Lamborghini Gallardo front end would be the addition of the Tecnocraft pre-preg Dry Carbon Fiber Hood. As a perfect complement to the Dry Carbon Fiber Glass Engine Hatch, and also weighing in at ~10lbs, our Dry Carbon Fiber Hood retains all factory Lamborghini Gallardo mounting hardware.

“Burned Edge” UV Clearcoat is available to the Tecnocraft Dry Carbon Fiber Hood as an option to increase visual aesthetics. Please contact us for details.

Featuring:

- Rigid pre-preg dry carbon fiber construction (Dry Carbon/Kevlar available by request)
- Installation manuals and additional hardware included.
- Retains factory Lamborghini Gallardo hood attachments with OEM fitment
- 85% weight reduction
- Note: Professional installation highly recommended.

Technocraft Lamborghini Gallardo Dry Carbon Fiber Front Bonnet Storage Bin

Description

With the purpose of extracting as much weight possible from the Lamborghini Gallardo, Tecnocraft has transformed another heavyweight OEM accessory item into a dry carbon, lightweight advantage. Our Dry Carbon Front Bonnet Storage Bin also integrates stock mounting locations for Battery Access Panels and OEM 6CD Changers and is fabricated to “drop-in” quickly and easily under the Lamborghini Gallardo front bonnet.

Featuring:

- Complete Dry Carbon OEM Replacement
- 85% Weight Reduction
- OEM Fitment and Installation
- Accommodates OEM 6CD Changer Mounting
- Accommodates Battery Access Panels
- Technical Weight: 5.3 lbs. (2.4kg – OEM rubber gasket not included)

Technocraft Lamborghini Gallardo Dry Carbon Fiber Glass Engine Hatch

Description

One of the most functional and extremely noticeable upgrades to the Gallardo weighs in at just under 10lbs without factory Lamborghini Gallardo glass. With weight reduction in mind, performing a dry carbon conversion of one of the heaviest and intricate parts of the Gallardo was not an easy task, but rather, a mandatory one by our standards.

If the gorgeous hand-built Gallardo V10 didn’t catch your attention enough, this upgrade guarantees increased spectatorship and even comes with the option of “burned edge” UV clearcoat. Please contact us for details.

Featuring:

- Rigid pre-preg dry carbon fiber construction (Dry Carbon/Kevlar available by request)
- Installation manuals and additional hardware included.
- Retains factory Lamborghini Gallardo hatch attachments with OEM fitment
- Weight without factory glass: 9.5lbs (~85% weight reduction)
- Note: Professional installation highly recommended. OEM Gallardo hatch glass not included

Technocraft Lamborghini Gallardo Dry Carbon Fiber GT Front Splitter

Description

Aerodynamic principles, specifically the Italian Bernoulli Effect, mandate that while a vehicle is in motion, air molecules are traveling above and below but create differences in air pressure that can negatively provide lift to a car. Tecnocraft developed dry carbon GT Front Splitter’s effectively channel incoming air naturally upwards and over an already aerodynamic Lamborghini Gallardo, increasing air molecule velocity above to combat a high-pressure lift environment below. Natural Lamborghini Gallardo design cues were accentuated in the development of the Tecnocraft GT Front Splitter while also providing much needed aerodynamic performance for confident spirited driving. Also compatible with both the Tecnocraft dry carbon Aerodynamic Underbody Panels and Tecnocraft GT Front Splitter for the Lamborghini Gallardo.

Featuring:

- Honeycomb Matrix Reinforced (HMR) pre-preg dry carbon fiber construction
- Superior strength and durability when compared to PUR or ABS
- Enhanced front-end downforce for increased lateral stability
- Aggressive accentuated styling
- Available in natural dry carbon fiber or carbon kevlar finish
- Installation manuals and additional hardware included.
- Retains factory Lamborghini Gallardo OEM fitment
- Note: Professional installation highly recommended

Technocraft Lamborghini Gallardo Dry Carbon Fiber GT Wing Assembly

Description

Balanced form and function in a 100% Dry Carbon GT Wing. To improve downforce during spirited drives, our designers have taken their racing fabrication experiences into consideration and produced a lightweight, durable wing assembly to complement other Tecnocraft aerodynamic upgrades to the Lamborghini Gallardo. With a dry-carbon hollow core design and integrated gurney flap, this adjustable GT Wing can keep the Gallardo planted at any speed.

Featuring:

- Single Plane, Aerodynamically Effective, High Downforce and Low Drag Spec Wing Design
- Dry Carbon Construction w/ Integrated Gurney Flap
- Reinforced Hollow Core, Ultralight Design
- HMR (Honeycomb Matrix Reinforced) Dry Carbon Standoffs
- HMR Reinforced End Plates
- 6-Way (15 Degrees) Adjustable
- Installation Hardware Included
- Technical Weight: 6.31 lbs. (2.86kg – assembly package)

*Technical PROFESSIONAL INSTALLATION REQUIRED. Note: Tecnocraft GT Wing does NOT replace factory automatic lift wing and works in conjunction with OEM wing towards dual element design. Drilling through hatch assembly system required.

Technocraft Lamborghini Gallardo Dry Carbon Fiber Headlight Washer Covers

Description

With painstaking attention to detail, our Dry Carbon Headlight Washer Covers finish-off the front end of the Lamborghini Gallardo perfectly. Complementing the Dry Carbon Bonnet, and Dry Carbon Front Splitter, these covers convey a sense of perfectionism in having absolute weight savings throughout the vehicle.

Featuring:

-Dry Carbon Fiber Exterior Accent
-Replaces Factory ABS Plastic Washer Covers
-OEM Fitment and Installation with existing hardware
- Technical Weight: 0.15lbs (72g)

Technocraft Lamborghini Gallardo Dry Carbon Fiber Rear Diffuser

Description

As high velocity air moves from front to rear, vehicle aerodynamics become increasingly important in terms of road stability. Our honeycomb reinforced dry carbon rear diffuser for the Lamborghini Gallardo helps to channel high velocity air from underneath the vehicle into smoother flowing venturi channels, improving aerodynamics at high speeds, and complementing any additional aerodynamic wings. With the ultra-lightweight benefits of pre-preg dry carbon fiber our rear diffuser is designed to replace the factory rear diffuser, upgrade rear aesthetics, and optimally perform in combination with both the Tecnocraft dry carbon Aerodynamic Underbody Panels and Tecnocraft GT Front Splitter for the Lamborghini Gallardo.

Featuring:

- Honeycomb Matrix Reinforced (HMR) pre-preg dry carbon fiber construction
- Superior strength and durability when compared to PUR or ABS
- Improved high speed lateral stability
- Available in natural dry carbon fiber or carbon kevlar finish
- Installation manuals and additional hardware included.
- Retains factory Lamborghini Gallardo OEM fitment
- Note: Professional installation highly recommended

Technocraft Lamborghini Gallardo Dry Carbon Fiber T1 Racing Seat

Description

A culmination of international racing seat design efforts have finally produced a seat worthy of the Tecnocraft marque. The Tecnocraft ‘T1’ Racing seat is the ultimate example of purpose-driven weight reduction – an industry standard 100% dry carbon seat made to adapt to multiple automotive makes and models. While also retaining an aesthetically organic, muscular appearance, these rigid seats maintain excellent seatback comfort due to their spine-formed, ergonomic nature. An added pair of T1 seats to replace OEM seats a stock vehicle virtually guarantees 100+ lb. weight reduction.

Featuring:

- Hybrid Tillett Mfg. Technology (USA/UK),
- 2×2 + Uniweave Hi-Strength Combination Construction
- HANS Device / Safety Harness Ready* Cut-outs (including Submarine) w/ Schroth Racing Enduro Safety Harnesses (optional, as shown)
- Spine-formed, ultra comfortable, suede lined (optional)
- Multiple 5-degree incremental sideplate angle adjustments (LG-BR001)
- Forward and backward mobility via seat sliders (LB-BR001)
- Seat Mounting Hardware LG-BR001* (sold separately, specific to Lamborghini Gallardo)
- Technical Weight – 6 lbs. (2.72kg excluding LG-BR001)

*Due to the unforeseen liability concerns upon installing any Tecnocraft Safety Equipment, including LG-RS001C, LG-BR001, and LG-HN001, PROFESSIONAL INSTALLATION IS HIGHLY RECOMMENDED and products are understood by consumer to be OFF-ROAD USE ONLY upon purchase.

Technocraft Lamborghini Gallardo T1 Racing Seat Mounting Hardware

Description

Tecnocraft ‘T1” Seat Mounting Hardware (LG-BR001)* is specifically designed for use in the Lamborghini Gallardo platform only, specifically along with LG-RS001C. These laser-cut “X” brace design floor brackets are constructed from 3/16” Chromoly Steel and can be optionally powdercoat color-matched to suit vehicle interior. Our designers have also accounted for fabrication requirements toward any road-race/race/off-road use applications and associations that require high-quality construction hardware as a prerequisite to these events.

With the ‘T1’ Racing Seats (LG-RS001C), the Seat Mounting Hardware firmly plants the “weight” of the combination onto the chassis floor, lowering the center of gravity of the weight, which directly equates to a more maneuverable drive.

Features:

- (2) 3/16” 4130 Chromoly Steel Lasercut Floor Brackets w/ 4, 5, or 6 pt. racing harness capability (Schroth Racing ‘Enduro’ harness recommended)
- ‘X’-brace design maintains structural rigidity of the floor bracket
- Accomodates OEM Lamborghini seatbelt hardware for continued use of factory seatbelts

Technocraft Lamborghini Gallardo Four Point Harness Bar

Description

For Lamborghini owners looking to take their Gallardo’s to the next level of safety during any road-racing or spirited driving events, Tecnocraft presents the world’s first and only industry-standard commercial harness bar system in the world. Our harness bar assembly specifically contours to the Gallardo interior, maintaining rear hatch-access control, OEM seatbelt usage, and maximum T1 seat (LG-RS001C) adjustability and clearance, while bolting straight through the vehicle frame in factory locations. Safety and strength are displayed throughout the intricate design of the harness system, from its LG-BR001 floor bracket mounting support bars, to the “no compromise” inclusion of Carbon/Kevlar self-lubricating spherical rod ends for easy adjustability and final system installation. The Tecnocraft Gallardo 4-Pt. Racing Harness Bar Assembly is the ultimate display of consumer dedication to safe and spirited Lamborghini driving experiences.

Features:

- Specifically for use with LG-RS001C racing seats and LG-BR001 ONLY.
- Mounts directly to LG-BR001 floor bracket assembly
- Powdercoat color-match (optional)
- (1) 1.5”OD 4130 Chromoly Main Harness Support Bar (Schroth Racing Harnesses are the preferred safety harnesses for use w/ Tecnocraft (LG-HN001)
(4) 3/4”OD 4130 2L/2R Chromoly Support bars (w/ Self-Lubricating Carbon/Kevlar Race, Spherical Rod Ends) for mounting to (LG-BR001) floor brackets
- (4) Aluminum ‘O’ Type Belt Clamps

Description

As one of the few aesthetic-only products Tecnocraft will develop, the Tecnocraft “Grey Smoked” Sidemarker was an essential visual upgrade to replace the factory “yellow” OEM Lamborghini sidemarkers. Serving as a perfect transitory item from fender to front bumper, these sidemarkers were constructed with true ‘grey’ ABS plastics and include, darker precision cut lens prisms that preserve light output. Description: -Body constructed in true ‘grey’ ABS plastic – Transparent ‘TECNOCRAFT’ Authentic Font embedded within lens -‘TECNOCRAFT USA’ molded into grey ABS plastic back -Not a film or sprayed on “smoke” appearance -Retains OEM fitment and hardware.

Technocraft Envy System for BMW M3

Posted on April 3, 2012 by Aaron

Tecnocraft E9X M3 Envy Intake System

Description

TECNOCRAFT introduces its first major step into European mass-market product in their release of the TECNOCRAFT E9X M3 ENVY Intake System. Designed from the ground up, all in-house, with a performance build strictly in mind, our dry carbon fabrication team set to work in producing the most comprehensive quality intake system BMW E92 M3 owners (and would-be owners) have ever seen. And with the consumer in mind, this completely modular system consisting of four, separate and equally functional, pieces fabricated in 100% Dry Carbon (or in Carbon/Kevlar special edition for an added cost) can find its way into your M engine bay over time.

TECHNICAL SPECIFICATIONS

The complete ENVY™ Intake System gains horsepower and increases throttle response on both the dynamometer and real world use, as expected in all functional ram air intake systems – forward motion at over 60mph brings the performance of the ENVY™ to life.

Dynamometer: 8-11RWHP
Real world use: 13-17RWHP

TECNOCRAFT E9X M3 ENVY™ Intake System includes the following (in order of primary airflow):

ENVY™ RAM Air Scoop
-Stage 1 of the ENVY™ intake system is a direct drop-in replacement of the plastic OEM intake bridge on E9X M3s. With a more highly effective design versus factory, especially at speed, the ENVY’s RAM Air Scoop ensures that a large volume of air can be force fed into a starved intake system. Also, since the RAM Air Scoop is fabricated in 100% DRY CARBON the goal was to maximally enhance airflow dynamics conforming to the tight space tolerances behind the M3 kidney grilles. Rest assured this goal was achieved and the largest RAM Air Scoop in the market for the E9X M3s are now readily available.

ENVY™ Transition Chamber
-Stage 2 of the ENVY™ intake system is a direct drop-in replacement of the plastic transition pipe on E9X M3s. The main advantages of the ENVY™ Transition Chamber is the smooth delivery of intake charge from the RAM Air Scoop by its elimination of unnecessary notches and choked design points leading into the factory M3 airbox. Forced air makes its first contact with an organically designed transition chamber, which allows airflow from the ENVY™ Ram Air scoops to be naturally reservoired and transitioned smoothly from left to right. All unnecessary turbulence was eliminated in the ENVY™ Transition Chamber’s design and conforms to extremely tight tolerances to provide a dramatic volume increase to charged air.

ENVY™ Enlarged Intake Cover
-Stage 3 of the ENVY™ intake system is a direct replacement of the factory airbox cover on E9X M3s. While we consider the factory intake box design made available by BMW to be sufficient, another necessary step in a complete ENVY™ intake system was development of an Enlarged Intake Cover without the many unnecessary points of intake turbulence while also increasing total airbox volume by 30%. Our Enlarged Intake Cover design carries charged air in greater volume from the Transition Chamber up and over the factory or BMC filter (optional) smoothly, hindering disruption from air filter structure as much as possible before reaching the ENVY™ ChargePipe. Factory fitment in a 100% Dry Carbon product was necessary to ensure hood scoop function remains available to the entire airbox as well.

ENVY™ ChargePipe
-The 4th and Final Stage of the ENVY™ Intake System is the ENVY™ intake system’s most highly sought after, direct replacement of the factory rubber chamber before the intake manifold. The ENVY™ ChargePipe eliminates the final and most important choke point in air intake charge while dramatically reducing turbulent airflow. Its extremely organic 100% Dry Carbon design allows for the largest and smoothest transition of air from the entire intake system, complimenting even the factory E9X M3 intake system where it is most needed. The ChargePipe is our featured highlight product of the ENVY™ intake system and is suggested by TECNOCRAFT to be a first investment towards a complete ENVY™ intake system if purchased as a standalone product. The ENVY™ ChargePipe has been specifically paired with a BMC filter as a perfect combination upgrade for the most noticeable throttle response, horsepower and torque gains of the entire ENVY™ system.

BMC E9X M3 Performance Intake Filter for the Envy™ Intake System
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

MORE INFORMATION ABOUT TECNOCRAFT AND THE E9X ///M3 ENVY™ INTAKE SYSTEM:

With organic design elements taken from the highly praised TECNOCRAFT Lamborghini Gallardo ‘Hi-Flow Intake System’, keeping optimal airflow dynamics was a primary concern – having also been developed in 100% Dry Carbon, our intake systems are natural heatshields and do their part to greatly reduce heatsoak. All parts of the ENVY™ system have been enlarged by at least 30% in volume, designed with smoothly transitions, and reduced in weight (if not all three at the same time) to ensure every ounce of horsepower can be gained while naturally aspirated.

The TECNOCRAFT E9X M3 ENVY™ Intake System is aptly named and priced quite right for the discerning E9X M3 owner – have the most complete and comprehensively designed, 100% Dry Carbon intake system in the BMW aftermarket and make all the rest of them jealous. Available today at http://www.tecnocraft.com or at your local TECNOCRAFT dealer.
Tecnocraft E9X M3 Envy™ RAM Air Scoop

Description

ENVY™ RAM Air Scoop
-Stage 1 of the ENVY™ intake system is a direct drop-in replacement of the plastic OEM intake bridge on E9X M3s. With a more highly effective design versus factory, especially at speed, the ENVY’s RAM Air Scoop ensures that a large volume of air can be force fed into a starved intake system. Also, since the RAM Air Scoop is fabricated in 100% DRY CARBON the goal was to maximally enhance airflow dynamics conforming to the tight space tolerances behind the M3 kidney grilles. Rest assured this goal was achieved and the largest RAM Air Scoop in the market for the E9X M3s are now readily available.

Tecnocraft introduces its first major step into European mass-market product in their release of the TECNOCRAFT E9X M3 ENVY™ Intake System. Designed from the ground up, all in-house, with a performance build strictly in mind, our dry carbon fabrication team set to work in producing the most comprehensive quality intake system BMW E92 M3 owners (and would-be owners) have ever seen. And with the consumer in mind, this completely modular system consisting of four, separate and equally functional, pieces fabricated in 100% Dry Carbon (or in Carbon/Kevlar special edition for an added cost) can find its way into your M engine bay over time.

Tecnocraft E9X M3 Envy™ Transition Chamber

Description

ENVY™ Transition Chamber
-Stage 2 of the ENVY™ intake system is a direct drop-in replacement of the plastic transition pipe on E9X M3s. The main advantages of the ENVY™ Transition Chamber is the smooth delivery of intake charge from the RAM Air Scoop by its elimination of unnecessary notches and choked design points leading into the factory M3 airbox. Forced air makes its first contact with an organically designed transition chamber, which allows airflow from the ENVY™ Ram Air scoops to be naturally reservoired and transitioned smoothly from left to right. All unnecessary turbulence was eliminated in the ENVY™ Transition Chamber’s design and conforms to extremely tight tolerances to provide a dramatic volume increase to charged air.

Tecnocraft E9X M3 Envy™ Enlarged Intake Cover

Description

ENVY™ Enlarged Intake Cover
-Stage 3 of the ENVY™ intake system is a direct replacement of the factory airbox cover on E9X M3s. While we consider the factory intake box design made available by BMW to be sufficient, another necessary step in a complete ENVY™ intake system was development of an Enlarged Intake Cover without the many unnecessary points of intake turbulence while also increasing total airbox volume by 30%. Our Enlarged Intake Cover design carries charged air in greater volume from the Transition Chamber up and over the factory or BMC filter (optional) smoothly, hindering disruption from air filter structure as much as possible before reaching the ENVY™ ChargePipe. Factory fitment in a 100% Dry Carbon product was necessary to ensure hood scoop function remains available to the entire airbox as well.

Tecnocraft E9X M3 Envy™ ChargePipe

Description

ENVY™ ChargePipe
-The 4th and Final Stage of the ENVY™ Intake System is the ENVY™ intake system’s most highly sought after, direct replacement of the factory rubber chamber before the intake manifold. The ENVY™ ChargePipe eliminates the final and most important choke point in air intake charge while dramatically reducing turbulent airflow. Its extremely organic 100% Dry Carbon design allows for the largest and smoothest transition of air from the entire intake system, complimenting even the factory E9X M3 intake system where it is most needed. The ChargePipe is our featured highlight product of the ENVY™ intake system and is suggested by TECNOCRAFT to be a first investment towards a complete ENVY™ intake system if purchased as a standalone product. The ENVY™ ChargePipe has been specifically paired with a BMC filter as a perfect combination upgrade for the most noticeable throttle response, horsepower and torque gains of the entire ENVY™ system.

Tecnocraft E9X M3 Envy™ Equipped Intake Manifold

Description

Tecnocraft E9X M3 Envy™ Equipped Intake Manifold
Breathe more power into your M3 by outfitting it’s OEM BMW Factory Plenum with the TECNOCRAFT E9X M3 ENVY Intake Manifold (Cover Replacement). By enlarging the available volume after the throttle body, the driver gains immediate throttle response, gains of torque and horsepower. Along with the increased volume, the ENVY Intake Manifold also eliminates unnecessary turbulence areas immediately surrounding the factory air horns. In combination with the full ENVY Intake System, the ENVY equipped Intake Manifold resonates an intoxicating V8 growl under the hood*. Its BMW-esque design also enhances its presence as an ENVY system engine bay centerpiece.

*To fully experience the increased advantages in an ENVY-equipped Intake Manifold, ECU tuning and/or engine work is suggested, but not necessary.

Featuring:
-100% Dry Carbon Fiber Construction, Made in the USA.
-HMR, Honeycomb Matrix Reinforced center area for extra strength and rigidity.
-100% CNC Machined Strength Rods (included and installed into every complete ENVY core)
-100% QC and Extreme Aircraft Grade Epoxy Fusion
-Core-exchange program (recommended).
-Installs into factory OEM BMW part location

BMC E9X M3 Performance Intake Filter

Description

Design and materials
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

Advanced technology
BMC technical staff has developed a particular production system based on soft rubber moulding which produces the familiar BMC red filters. They are made in one single piece with no welded joints in the corners, thus avoiding breaking risks. This system, called “Full Moulding” comes from R&D in F1 and it is significant of BMC air filters’ technical and quality specifics.

Tecnocraft E9X M3 Headlight Access Covers

Description

Tecnocraft E9X M3 Headlight Access Covers
TECNOCRAFT has developed 100% Dry Carbon headlight access covers to accentuate the E9X M3 under-the-hood area even further. With a range of colored aluminum washers available for the covers, onlookers will be quickly drawn to the detail in the pair of dry carbon access covers.

Featuring:
- 100% Dry Carbon Construction
- Mold-formed to left and right headlight access areas
- Subtle, yet effective
- Installs into factory locations with included replacement hardware (red washers)
- Available in 1×1 and 2×2 weave

Tecnocraft E9X M3 Right-Side Engine Bay Accessory Cover

Description

Tecnocraft E9X M3 Right-Side Engine Bay Accessory Cover
Glorify every aspect of your E9X M3 engine bay by outfitting it with the TECNOCRAFT Right-Side Engine Bay Accessory Cover. This cover is designed to mirror and compliment the left side ENVY Intake Airbox Cover for a more complete and ‘flooded’ 100% Dry Carbon engine bay. It’s bolt-on, simplistic design retains Immediate access to the coolant reservoir and oil cap, which are vital for on-the-go, quick fill-ups.

Featuring:
- 100 % Dry Carbon Construction
- Covers unnecessary “clutter” in the immediate area
- Retains immediate coolant and oil access without removal
- Completes the look of the entire TECNOCRAFT ENVY Engine Bay accessories
- Installs into factory locations with included replacement hardware (red washers)
- Available in 1×1 and 2×2 weave

Tecnocraft E9X M3 Cabin Air Filter Covers (Pair)

Description

Tecnocraft E9X M3 Cabin Air Filter Covers (Pair)
For a direct bolt-on to cover the plain-looking nature of the left and right Cabin Air Filters under the hood, we have developed Cabin Air Filter Covers (pair) to compliment the rest of the TECNOCRAFT ENVY Engine Bay. The pair of covers are mold-formed to the original OEM cabin air filter box tops and install with relative ease in factory locations.

Featuring:
- 100% Dry Carbon Construction
- Completes the look of the entire TECNOCRAFT ENVY Engine Bay accessories
- Installs into factory locations with OEM hardware
- Available in 1×1 and 2×2 weave

Tecnocraft E9X M3 Envy™ Ultimate Front Lip

Description

Tecnocraft E9X M3 Envy™ Ultimate Front Lip + Center Extension
Take control of the road with the TECNOCRAFT E9X M3 Ultimate ENVY Front Lip – the most form-and-function based, 100% Dry Carbon lip available for the E90/E92 M3 Coupe and Sedan. Its design incorporates the E9X’s front bumper aesthetics, improves downforce, and provides increased airflow to the OEM BMW intake system (through the front bumper)*. The ENVY Front Lip is also made to withstand anything the road can give it. With Honeycomb Matrix Reinforced (HMR) construction, the Tecnocraft Ultimate ENVY M3 Lip is the strongest and lightest front-end aerodynamic add-on in its class.

Featuring:
- 100% Dry Carbon / Kevlar / Carbon construction (Kevlar sandwich layer)
- HMR – Honeycomb Matrix Reinforced Construction
- Dry Carbon Center Extension (reversible 1×1 and 2×2 weave)
- Perfect E9X M3 Coupe and Sedan Fitments
- Proudly Made in the USA

*Removal of E9X Front Bumper is required for installation.

Options
•100% Dry Carbon Center Extension – Reversible Weave, 1×1 and 2×2
•RAW, Dry CF – Non-clearcoated version.
•GLOSS, UV-clearcoated directly from Tecnocraft.

Technocraft Products for Lamborghini Gallardo

Posted on March 5, 2012 by Aaron

Technocraft Lamborghini Gallardo Dry Carbon Fiber Aero Underbody Panels

Technocraft Aerodynamic Underbody Panels continue to reinforce aerodynamics beneath the Lamborghini Gallardo. Underbody panels are a highly overlooked component in improving airflow velocity – our pre-preg dry carbon underbody panels also provide an 80% weight reduction to factory injection molded plastic, & incorporate much improved venturi channels toward the rear of the vehicle. Developed in two parts; a front section supporting the Technocraft GT Front Splitter, & a mid-section to continue airflow characteristics to the Tecnhocraft Rear Diffuser. Performance inspired Technocraft Aerodynamic Underbody Panels not only complement but also complete the entire Technocraft exterior package developed specifically for the Lamborghini Gallardo.

Featuring:

- Superior strength & durability when compared to PUR or ABS
- Improved high speed lateral stability
- Available separately (front & middle sections)
- Available in natural dry carbon fiber or carbon kevlar finish
- Installation manuals & additional hardware included. Retains factory Lamborghini Gallardo OEM fitment
- Note: Professional installation highly recommended

Technocraft Lamborghini Gallardo Dry Carbon Fiber Cold Air Intake System

Airflow dynamics & intake efficiency are greatly improved over the factory Lamborghini Gallardo intake airboxes with the installation of our complete dry carbon fiber intake system. Furthermore, we referenced the mantra of ‘form & function’ & incorporated an organic, fluid-composite design that improves the audible characteristics, visual aesthetics & overall horsepower of the Lamborghini Gallardo V10. Technocraft Cold Air Intake Systems for the Lamborghini Gallardo (MY2003+) maintain the natural curvilinear flow of ingested air as much as possible, reducing as many ’90 degree’ junctions to keep airflow naturally moving forward.

Featuring:

- Increased natural airflow toward intake plenum with larger venturi chambers
- Aesthetically pleasing muscular (but functional) appearance to complement a handcrafted Italian V10 engine
- Pre-preg aerospace/race grade dry carbon fiber (Carbon Kevlar is available upon request)
- Installation manuals & additional hardware included. Retains factory Lamborghini Gallardo OEM fitment
- Assembled Weight (as seen): 1.1kg
- Note: Professional installation highly recommended

Technocraft Lamborghini Gallardo Dry Carbon Fiber E-Gear Plate Accent

Technocraft precisely developed our Lamborghini Gallardo E-Gear interior plate in dry carbon fiber to provoke curiosity within the V10 powerplant. This dry carbon accent is reserved for individuals willing to push weight saving performance to extremes, but also remain relatively subtle within the Gallardo cockpit.

Featuring:

-Factory Lamborghini Gallardo E-Gear Plate fitment
-Retains original hardware
-Easy installation
-Available in natural dry carbon fiber or carbon kevlar finish

Technocraft Lamborghini Gallardo Dry Carbon Fiber Engine Compartment Covers

To complete your purchase of additional Technocraft Lamborghini Gallardo products, our design team further refines the visual appeal of the engine bay by creating complementary dry carbon OEM replacement engine compartment covers. Made with pre-preg dry carbon fiber, these compartment covers help to maximally decrease engine hatch weight & ensure a theme of dry carbon commonality within the Lamborghini Gallardo V10 powerplant.

Featuring:

Technocraft Lamborghini Gallardo Dry Carbon Fiber Front Bonnet

Another invaluable & extremely noticeable upgrade to the Lamborghini Gallardo front end would be the addition of the Technocraft pre-preg Dry Carbon Fiber Hood. As a perfect complement to the Dry Carbon Fiber Glass Engine Hatch, & also weighing in at 4.5kg, our Dry Carbon Fiber Hood retains all factory Lamborghini Gallardo mounting hardware. “Burned Edge” UV Clearcoat is available to the Technocraft Dry Carbon Fiber Hood as an option to increase visual aesthetics. Please contact us for details.

Featuring:

Technocraft Lamborghini Gallardo Dry Carbon Fiber Front Bonnet Storage Bin

With the purpose of extracting as much weight possible from the Lamborghini Gallardo, Technocraft has transformed another heavyweight OEM accessory item into a dry carbon, lightweight advantage. Our Dry Carbon Front Bonnet Storage Bin also integrates stock mounting locations for Battery Access Panels & OEM 6CD Changers & is fabricated to “drop-in” quickly & easily under the Lamborghini Gallardo front bonnet.

Featuring:

Technocraft Lamborghini Gallardo Dry Carbon Fiber Glass Engine Hatch

One of the most functional & extremely noticeable upgrades to the Gallardo weighs in at just under 4.5kg without factory Lamborghini Gallardo glass. With weight reduction in mind, performing a dry carbon conversion of one of the heaviest & intricate parts of the Gallardo was not an easy task, but rather, a mandatory one by our standards. If the gorgeous hand-built Gallardo V10 didn’t catch your attention enough, this upgrade guarantees increased spectatorship & even comes with the option of “burned edge” UV clearcoat. Please contact us for details.

Featuring:

- Rigid pre-preg dry carbon fiber construction (Dry Carbon/Kevlar available by request)
- Installation manuals and additional hardware included.
- Retains factory Lamborghini Gallardo hatch attachments with OEM fitment
- Weight without factory glass: 4.3kg (85% weight reduction)
- Note: Professional installation highly recommended. OEM Gallardo hatch glass not included

Technocraft Lamborghini Gallardo Dry Carbon Fiber GT Front Splitter

Aerodynamic principles, specifically the Italian Bernoulli Effect, mandate that while a vehicle is in motion, air molecules are traveling above & below but create differences in air pressure that can negatively provide lift to a car. Technocraft developed dry carbon GT Front Splitter’s effectively channel incoming air naturally upwards & over an already aerodynamic Lamborghini Gallardo, increasing air molecule velocity above to combat a high-pressure lift environment below. Natural Lamborghini Gallardo design cues were accentuated in the development of the Technocraft GT Front Splitter while also providing much needed aerodynamic performance for confident spirited driving. Also compatible with both the Technocraft dry carbon Aerodynamic Underbody Panels and Technocraft GT Front Splitter for the Lamborghini Gallardo.

Featuring:

Technocraft Lamborghini Gallardo Dry Carbon Fiber GT Wing Assembly

Balanced form and function in a 100% Dry Carbon GT Wing. To improve downforce during spirited drives, our designers have taken their racing fabrication experiences into consideration & produced a lightweight, durable wing assembly to complement other Technocraft aerodynamic upgrades to the Lamborghini Gallardo. With a dry-carbon hollow core design & integrated gurney flap, this adjustable GT Wing can keep the Gallardo planted at any speed.

Featuring:

- Single Plane, Aerodynamically Effective, High Downforce & Low Drag Spec Wing Design
- Dry Carbon Construction with Integrated Gurney Flap
- Reinforced Hollow Core, Ultralight Design
- HMR (Honeycomb Matrix Reinforced) Dry Carbon Standoffs
- HMR Reinforced End Plates
- 6-Way (15 Degrees) Adjustable
- Installation Hardware Included
- Technical Weight: 2.9kg. (assembly package)

Technocraft Lamborghini Gallardo Dry Carbon Fiber Headlight Washer Covers

With painstaking attention to detail, our Dry Carbon Headlight Washer Covers finish-off the front end of the Lamborghini Gallardo perfectly. Complementing the Dry Carbon Bonnet, & Dry Carbon Front Splitter, these covers convey a sense of perfectionism in having absolute weight savings throughout the vehicle.

Featuring:

-Dry Carbon Fiber Exterior Accent
-Replaces Factory ABS Plastic Washer Covers
-OEM Fitment and Installation with existing hardware
- Technical Weight: 0.07g

Technocraft Lamborghini Gallardo Dry Carbon Fiber Rear Diffuser

As high velocity air moves from front to rear, vehicle aerodynamics become increasingly important in terms of road stability. Our honeycomb reinforced dry carbon rear diffuser for the Lamborghini Gallardo helps to channel high velocity air from underneath the vehicle into smoother flowing venturi channels, improving aerodynamics at high speeds, & complementing any additional aerodynamic wings. With the ultra-lightweight benefits of pre-preg dry carbon fiber our rear diffuser is designed to replace the factory rear diffuser, upgrade rear aesthetics, & optimally perform in combination with both the Technocraft dry carbon Aerodynamic Underbody Panels & Technocraft GT Front Splitter for the Lamborghini Gallardo.

Featuring:

Technocraft Lamborghini Gallardo Dry Carbon Fiber T1 Racing Seat

A culmination of international racing seat design efforts have finally produced a seat worthy of the Technocraft marque. The Technocraft ‘T1’ Racing seat is the ultimate example of purpose-driven weight reduction – an industry standard 100% dry carbon seat made to adapt to multiple automotive makes & models. While also retaining an aesthetically organic, muscular appearance, these rigid seats maintain excellent seatback comfort due to their spine-formed, ergonomic nature. An added pair of T1 seats to replace OEM seats a stock vehicle virtually guarantees 45+ kg. weight reduction.

Featuring:

*Due to the unforeseen liability concerns upon installing any Tecnocraft Safety Equipment, including LG-RS001C, LG-BR001, & LG-HN001, PROFESSIONAL INSTALLATION IS HIGHLY RECOMMENDED & products are understood by consumer to be OFF-ROAD USE ONLY upon purchase.

Technocraft Lamborghini Gallardo T1 Racing Seat Mounting Hardware

Technocraft ‘T1” Seat Mounting Hardware (LG-BR001)* is specifically designed for use in the Lamborghini Gallardo platform only, specifically along with LG-RS001C. These laser-cut “X” brace design floor brackets are constructed from 3/16” Chromoly Steel & can be optionally powdercoat color-matched to suit vehicle interior. Our designers have also accounted for fabrication requirements toward any road-race/race/off-road use applications & associations that require high-quality construction hardware as a prerequisite to these events. With the ‘T1’ Racing Seats (LG-RS001C), the Seat Mounting Hardware firmly plants the “weight” of the combination onto the chassis floor, lowering the center of gravity of the weight, which directly equates to a more maneuverable drive.

Features:

Technocraft Lamborghini Gallardo Four-Point Harness Bar

For Lamborghini owners looking to take their Gallardo’s to the next level of safety during any road-racing or spirited driving events, Technocraft presents the world’s first & only industry-standard commercial harness bar system in the world. Our harness bar assembly specifically contours to the Gallardo interior, maintaining rear hatch-access control, OEM seatbelt usage, & maximum T1 seat (LG-RS001C) adjustability & clearance, while bolting straight through the vehicle frame in factory locations. Safety & strength are displayed throughout the intricate design of the harness system, from its LG-BR001 floor bracket mounting support bars, to the “no compromise” inclusion of Carbon/Kevlar self-lubricating spherical rod ends for easy adjustability & final system installation. The Technocraft Gallardo Four-Pt. Racing Harness Bar Assembly is the ultimate display of consumer dedication to safe & spirited Lamborghini driving experiences.

Features:

Technocraft Lamborghini Gallardo Smoked Side Markers

As one of the few aesthetic-only products Technocraft will develop, the Technocraft “Grey Smoked” Sidemarker was an essential visual upgrade to replace the factory “yellow” OEM Lamborghini sidemarkers. Serving as a perfect transitory item from fender to front bumper, these sidemarkers were constructed with true ‘grey’ ABS plastics & include, darker precision cut lens prisms that preserve light output.

Description:

Body constructed in true ‘grey’ ABS plastic
Transparent ‘TECNOCRAFT’ Authentic Font embedded within lens
‘TECNOCRAFT USA’ molded into grey ABS plastic back
Not a film or sprayed on “smoke” appearance
Retains OEM fitment and hardware

Technocraft Envy System for BMW M3

Posted on March 1, 2012 by Aaron

Tecnocraft E9X ///M3 Envy™ Intake System

TECHNOCRAFT introduces its first major step into European mass-market product in their release of the TECHNOCRAFT E9X M3 ENVY™ Intake System. Designed from the ground up, all in-house, with a performance build strictly in mind, our dry carbon fabrication team set to work in producing the most comprehensive quality intake system BMW E92 M3 owners (& would-be owners) have ever seen. And with the consumer in mind, this completely modular system consisting of four, separate & equally functional, pieces fabricated in 100% Dry Carbon (or in Carbon/Kevlar special edition for an added cost) can find its way into your M-engine bay over time.

TECHNICAL SPECIFICATIONS

Dynamometer: 8-11RWHP
Real world use: 13-17RWHP

TECNOCRAFT E9X ///M3 ENVY™ Intake System includes the following (in order of primary airflow):

ENVY™ RAM Air Scoop

Stage 1 of the ENVY™ intake system is a direct drop-in replacement of the plastic OEM intake bridge on E9X M3s. With a more highly effective design versus factory, especially at speed, the ENVY’s RAM Air Scoop ensures that a large volume of air can be force fed into a starved intake system. Also, since the RAM Air Scoop is fabricated in 100% DRY CARBON the goal was to maximally enhance airflow dynamics conforming to the tight space tolerances behind the M3 kidney grilles. Rest assured this goal was achieved & the largest RAM Air Scoop in the market for the E9X M3s are now readily available.

ENVY™ Transition Chamber

Stage 2 of the ENVY™ intake system is a direct drop-in replacement of the plastic transition pipe on E9X M3s. The main advantages of the ENVY™ Transition Chamber is the smooth delivery of intake charge from the RAM Air Scoop by its elimination of unnecessary notches & choked design points leading into the factory M3 airbox. Forced air makes its first contact with an organically designed transition chamber, which allows airflow from the ENVY™ Ram Air scoops to be naturally reservoired & transitioned smoothly from left to right. All unnecessary turbulence was eliminated in the ENVY™ Transition Chamber’s design & conforms to extremely tight tolerances to provide a dramatic volume increase to charged air.

ENVY™ Enlarged Intake Cover

Stage 3 of the ENVY™ intake system is a direct replacement of the factory airbox cover on E9X M3s. While we consider the factory intake box design made available by BMW to be sufficient, another necessary step in a complete ENVY™ intake system was development of an Enlarged Intake Cover without the many unnecessary points of intake turbulence while also increasing total airbox volume by 30%. Our Enlarged Intake Cover design carries charged air in greater volume from the Transition Chamber up & over the factory or BMC filter (optional) smoothly, hindering disruption from air filter structure as much as possible before reaching the ENVY™ ChargePipe. Factory fitment in a 100% Dry Carbon product was necessary to ensure hood scoop function remains available to the entire airbox as well.

ENVY™ ChargePipe

The 4th & Final Stage of the ENVY™ Intake System is the ENVY™ intake system’s most highly sought after, direct replacement of the factory rubber chamber before the intake manifold. The ENVY™ ChargePipe eliminates the final & most important choke point in air intake charge while dramatically reducing turbulent airflow. Its extremely organic 100% Dry Carbon design allows for the largest & smoothest transition of air from the entire intake system, complimenting even the factory E9X M3 intake system where it is most needed. The ChargePipe is our featured highlight product of the ENVY™ intake system & is suggested by TECHNOCRAFT to be a first investment towards a complete ENVY™ intake system if purchased as a standalone product. The ENVY™ ChargePipe has been specifically paired with a BMC filter as a perfect combination upgrade for the most noticeable throttle response, horsepower & torque gains of the entire ENVY™ system.

BMC E9X M3 Performance Intake Filter for the Envy™ Intake System

BMC air filters are designed & produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology & materials as the F1 air filters, are evident.

MORE INFORMATION ABOUT TECNOCRAFT & THE E9X M3 ENVY™ INTAKE SYSTEM

With organic design elements taken from the highly praised TECHNOCRAFT Lamborghini Gallardo ‘Hi-Flow Intake System’, keeping optimal airflow dynamics was a primary concern – having also been developed in 100% Dry Carbon, our intake systems are natural heatshields & do their part to greatly reduce heatsoak. All parts of the ENVY™ system have been enlarged by at least 30% in volume, designed with smoothly transitions, & reduced in weight (if not all three at the same time) to ensure every ounce of horsepower can be gained while naturally aspirated.

The TECHNOCRAFT E9X M3 ENVY™ Intake System is aptly named & priced quite right for the discerning E9X M3 owner – have the most complete & comprehensively designed, 100% Dry Carbon intake system in the BMW aftermarket & make all the rest of them jealous. Available today at http://www.tecnocraft.com or at your local TECHNOCRAFT dealer.

Technocraft E9X M3 Envy™ Equipped Intake Manifold

Breathe more power into your M3 by outfitting it’s OEM BMW Factory Plenum with the TECHNOCRAFT E9X M3 ENVY Intake Manifold (Cover Replacement). By enlarging the available volume after the throttle body, the driver gains immediate throttle response, gains of torque & horsepower. Along with the increased volume, the ENVY Intake Manifold also eliminates unnecessary turbulence areas immediately surrounding the factory air horns. In combination with the full ENVY Intake System, the ENVY equipped Intake Manifold resonates an intoxicating V8 growl under the hood*. Its BMW-esque design also enhances its presence as an ENVY system engine bay centerpiece.

*To fully experience the increased advantages in an ENVY-equipped Intake Manifold, ECU tuning and/or engine work is suggested, but not necessary.

Featuring:
-100% Dry Carbon Fiber Construction, Made in the USA.
-HMR, Honeycomb Matrix Reinforced center area for extra strength and rigidity.
-100% CNC Machined Strength Rods (included & installed into every complete ENVY core)
-100% QC and Extreme Aircraft Grade Epoxy Fusion
-Core-exchange program (recommended).
-Installs into factory OEM BMW part location

BMC E9X M3 Performance Intake Filter for the Envy™ Intake System

Design & materials
Qualified engineers using advanced software & expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials & must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes & from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

Advanced technology
BMC technical staff has developed a particular production system based on soft rubber moulding which produces the familiar BMC red filters. They are made in one single piece with no welded joints in the corners, thus avoiding breaking risks. This system, called “Full Moulding” comes from R&D in F1 & it is significant of BMC air filters’ technical & quality specifics.

Technocraft E9X M3 Headlight Access Covers

TECHNOCRAFT has developed 100% Dry Carbon headlight access covers to accentuate the E9X M3 under-the-hood area even further. With a range of colored aluminum washers available for the covers, onlookers will be quickly drawn to the detail in the pair of dry carbon access covers.

Technocraft E9X M3 Right-Side Engine Bay Accessory Cover

Glorify every aspect of your E9X M3 engine bay by outfitting it with the TECHNOCRAFT Right-Side Engine Bay Accessory Cover. This cover is designed to mirror & compliment the left side ENVY Intake Airbox Cover for a more complete & ‘flooded’ 100% Dry Carbon engine bay. It’s bolt-on, simplistic design retains Immediate access to the coolant reservoir & oil cap, which are vital for on-the-go, quick fill-ups.

Technocraft E9X M3 Cabin Air Filter Covers (Pair)

For a direct bolt-on to cover the plain-looking nature of the left & right Cabin Air Filters under the hood, we have developed Cabin Air Filter Covers (pair) to compliment the rest of the TECHNOCRAFT ENVY Engine Bay. The pair of covers are mold-formed to the original OEM cabin air filter box tops & install with relative ease in factory locations.

Technocraft E9X M3 Envy™ Ultimate Front Lip + Center Extension

Take control of the road with the TECHNOCRAFT E9X M3 Ultimate ENVY Front Lip – the most form-&-function based, 100% Dry Carbon lip available for the E90/E92 M3 Coupe & Sedan. Its design incorporates the E9X’s front bumper aesthetics, improves downforce, & provides increased airflow to the OEM BMW intake system (through the front bumper)*. The ENVY Front Lip is also made to withstand anything the road can give it. With Honeycomb Matrix Reinforced (HMR) construction, the Tecnocraft Ultimate ENVY M3 Lip is the strongest & lightest front-end aerodynamic add-on in its class.

Featuring:
- 100% Dry Carbon / Kevlar / Carbon construction (Kevlar sandwich layer)
- HMR – Honeycomb Matrix Reinforced Construction
- Dry Carbon Center Extension (reversible 1×1 and 2×2 weave)
- Perfect E9X ///M3 Coupe and Sedan Fitments
- Proudly Made in the USA

*Removal of E9X Front Bumper is required for installation.

Options
•100% Dry Carbon Center Extension – Reversible Weave, 1×1 and 2×2
•RAW, Dry CF – Non-clearcoated version.
•GLOSS, UV-clearcoated directly from Tecnocraft.